2022 Used Komatsu PC360 in Hefei: Two-Angle Yard Note for Export Buyers
A buyer does not always need twenty photographs to start a serious conversation. Sometimes two clean yard angles are enough to decide whether a machine is worth the next inspection step. They cannot prove everything, but they can show whether the basic story is consistent.
This note is for a used Komatsu PC360 excavator located in Hefei, Anhui. The unit is supplied as a 2022 machine with 1,650 working hours, original condition and original paint. The purpose here is simple: separate what these two photos can support from what still needs a working video or on-site inspection.
The quick stock card
| Machine | Komatsu PC360 crawler excavator |
| Year | 2022 |
| Working hours | 1,650 h |
| Location | Hefei, Anhui, China |
| Condition note | Original state, original paint |
| Typical class | Mid-to-large crawler excavator for earthmoving and loading work |
The first angle shows the PC360 lined up with other crawler excavators in the yard. The Komatsu side marking, boom, arm cylinders, upper frame, crawler frame and bucket area are visible. The machine has a clean, consistent yellow finish, with original-style decals and visible working dust on the undercarriage rather than a completely dressed showroom surface.
What original paint is useful for
Original paint is not a substitute for mechanical testing. It is useful because it keeps the machine's history easier to read. A fresh repaint can hide repairs, overspray, welded areas and panel changes. Original paint lets the buyer look for color consistency, decal condition, edge wear and impact marks without guessing what was covered yesterday.
On this PC360, the visible side panels and boom surfaces look consistent across the two provided angles. The buyer should still request close-ups of the counterweight corners, boom foot, arm welds, bucket linkage, cab lower frame and track guards. Those areas usually tell more than a wide beauty shot.
Second angle: export and working-readiness clues
The rear-side photograph gives a better sense of the machine's transport shape. The counterweight, rear body, boom posture, bucket, track shoes and lower frame can be seen from the opposite side. This view matters because export buyers must think about loading, not only digging.
Before quotation is finalized, confirm the shipping dimensions with the boom, arm and bucket positioned for transport. The buyer should also ask whether the bucket is included, whether any spare parts or attachments are part of the deal, and whether loading photos will be supplied at the port or yard.
What the photos do not prove yet
The two photographs support a good first impression, but they do not confirm hydraulic pressure, engine condition, controller hours or undercarriage wear percentage. For a 2022 machine with 1,650 hours, those details are exactly what a careful buyer should document before paying a deposit.
- Ask for a cold-start video with the monitor visible.
- Record engine sound at idle and working rpm.
- Operate boom, arm, bucket, swing and travel after the machine is warm.
- Photograph hydraulic pump area, valve block and hose ends after operation.
- Measure track link, shoe, roller, sprocket and idler condition on both sides.
- Confirm serial plate, hour meter and export paperwork.
Best-fit buyers
This PC360 makes sense for buyers who need a production excavator for road projects, earthmoving, foundations, quarry support or dealer resale stock. It is especially interesting when the buyer values an original-paint machine because the visual history has not been erased by heavy cosmetic preparation.
It is less suitable for a buyer who cannot arrange enough transport capacity or who needs a very small machine for narrow urban work. A PC360-class excavator needs space, the right trucks, the right bucket and a job that can use its size.
Next evidence to request
The next step should be a compact inspection file: serial plate, hour meter, cold-start video, hot working video, undercarriage measurements, hydraulic compartment photos, engine bay photos, bucket and linkage close-ups, transport dimensions and a written quote showing machine price, loading and shipping terms separately.
Contact CN Used Machinery with your destination port and working application to receive the current quotation and inspection package for this 2022 Komatsu PC360 in Hefei, Anhui.