Unspecified base label
Do not infer year, engine or generation. Ask for the full suffix, regional build and serial evidence.
Used Hitachi ZX200 for Sale from China: Which Generation?
GENERATION PASSPORT · HITACHI ZX200
Used Hitachi ZX200 for Sale from China: Which Generation?
A buyer can order a used Hitachi ZX200 through YUANJIAN in China. We can confirm a public unit or search for the required dash generation, LC or standard undercarriage, year, condition and budget, then arrange agreed identity inspection and FOB/CIF export terms. The exact ZX200 and all evidence are reconfirmed before payment because the family name alone is not a complete specification.
Hitachi Construction Machinery primary documents and current related listings reviewed 27 August 2026. Published 5G figures are configuration references, not certificates for every ZX200.
The ZX200 generation passport
Seller naming is often shortened. Use the full plate and product identification number before comparing specification, parts or price.
Earlier ZAXIS generation
Lower purchase price may be attractive, but controller access, pump condition and parts path need more attention.
Later regional generation
Official 5G documents provide traceable dimensions and weights; verify whether the offered 5A follows the same regional arrangement.
Newer regional label
Potentially newer controls and emissions equipment; local diagnostic and parts capability becomes more important.
Five-link evidence chain that prevents a false identity
A plate close-up is not enough because plates, panels and monitors can be changed. Keep each link visible within one evidence sequence.
1Whole machine
Begin with the complete excavator, background and distinguishing marks.
2Product identity
Move continuously to PIN and manufacturer plate without a cut.
3Powertrain
Connect engine plate, pump, controller and harness condition.
4Monitor
Show model information, hours, alarms and available service data.
5Contract and loading
Use the same identifiers in contract, balance-payment check and port loading record.
ZX200 diagnostic pattern: symptom to decision
| Observed symptom | Possible explanation | Comparison test | Buying response |
|---|---|---|---|
| Fast cold, slow hot | Pump wear, leakage or oil/temperature issue | Repeat timed combined cycles after warm-up | Price diagnosis before purchase |
| One function weaker | Cylinder, valve section or flow-sharing issue | Swap loads and compare functions at equal engine speed | Identify system, do not accept generic 'normal' |
| Swing knock or movement | Slew bearing, gearbox, brake or structure | Measure play and inspect mounting area | Independent repair estimate |
| Travels off line | Final drive, pump flow, brake or track tension | Forward/reverse on level ground in both speeds | Investigate side-specific cost |
| Clean paint, worn controls | Cosmetic refurbishment may exceed mechanical work | Compare pedals, pins, harnesses, fasteners and service history | Ignore appearance premium |
| Low hours, heavy wear | Meter or component replacement, or severe duty | Controller/service/wear cross-check | Value from condition, not hours |
Eight generation-specific ZX200 answers
What operating weight does Hitachi publish for ZX200-5G?
Hitachi's Latin America specification sheet lists 19,800 kg for ZX200-5G and 20,400 kg for ZX200LC-5G. Those are reference configurations; shoes, bucket, quick coupler, guards and regional equipment alter actual weight. A seller's ZX200-3 or 5A cannot inherit the figure automatically.
Passport decision: Use the official figure to frame questions, then measure the offered machine for freight.
ZX200 or ZX200LC: which is better?
LC is usually preferable when footprint, stability and lift envelope support the job, while standard undercarriage can reduce width and transport exposure. Hitachi's 5G reference shows 2,860 mm overall width for ZX200-5G and 2,990 mm for ZX200LC-5G with the stated shoes.
Passport decision: Choose LC for stability-driven work and standard carriage for easier movement, after checking the exact unit.
Is ZX200-5A better than ZX200-3?
It is later, but later does not equal healthier. A ZX200-5A may offer newer controls and condition, while ZX200-3 may be easier for technicians familiar with that generation. Compare warm hydraulics, controller faults, engine system, undercarriage, price and destination support.
Passport decision: Pay for the later generation only when condition and support justify the difference.
How deep can a ZX200 dig?
The official ZX200-5G brochure lists 6,670 mm maximum digging depth with the referenced 2.91 m arm. Other arms, buckets and generations change the number, and safe usable depth depends on ground and setup. Do not use one brochure value for every listing.
Passport decision: Confirm arm length and attachment before using depth as a purchase criterion.
How can a buyer verify ZX200 hours?
Cross-check monitor and controller data where accessible with dated service records, cab wear, linkage play, undercarriage consumption and cold-start condition. A replacement display or clean cab does not prove low total hours. Conflicting evidence should reduce the price or stop the deal.
Passport decision: Treat hours as a hypothesis until independent signals agree.
What hydraulic test matters on Hitachi ZX200?
Hitachi machines are often judged by smooth control feel, but subjective feel is not enough. Time repeated cycles cold and hot, test simultaneous functions, observe engine recovery, drift, swing and travel, and inspect oil and filters. Compare with another unit when possible under the same conditions.
Passport decision: Select the machine that remains balanced and predictable after full warm-up.
Can ZX200-3, -5A and -6A parts be ordered by model name?
No. Engines, pumps, controllers, harnesses, valves and emissions equipment vary by generation and market. A short sales label can create an expensive wrong-parts order. Use the full PIN, engine plate and component numbers before confirming destination support.
Passport decision: Reject a supplier who cannot provide the identifiers needed for parts matching.
What should the export evidence package include?
Continuous identity video, cold and hot tests, controller or monitor screens, undercarriage measurements, structure close-ups, fluid findings, attachments, known repairs, loading dimensions and contract identifiers. It should be recent and attached to one machine, not reused media from the same model.
Passport decision: Make evidence completion a payment milestone before shipment.
Choose a ZX200 generation YUANJIAN can verify or source
These product cards show current public candidates across the ZX200 family. If the required generation is not available, YUANJIAN can search other China inventory. A purchase quotation is issued only after the exact suffix, identity, condition and destination are confirmed.
Hitachi ZX200
Current related listing; generation, year, hours and identity require reconfirmation.
$20,000 USD
Hitachi ZX200-3
Current related listing; generation, year, hours and identity require reconfirmation.
$20,000 USD
Hitachi ZX200-5A
Current related listing; generation, year, hours and identity require reconfirmation.
$20,000 USD
Hitachi ZX200C-6A
Current related listing; generation, year, hours and identity require reconfirmation.
$20,000 USD
Hitachi ZX210LC-5A
Current related listing; generation, year, hours and identity require reconfirmation.
$21,000 USDPrimary Hitachi references
The two Hitachi Construction Machinery documents establish a traceable ZX200-5G/ZX200LC-5G reference for weight, width, working range and configuration. They do not certify other generations or a particular used machine.
- Hitachi ZX200-5G / ZX200LC-5G official specification sheet
- Hitachi ZX200-5G official brochure and dimensions
Hitachi ZX200 identity FAQ
Can I purchase a used Hitachi ZX200 from YUANJIAN?
Yes. YUANJIAN can confirm a listed ZX200 or search China inventory for the required generation and condition, arrange agreed identity inspection and quote FOB or CIF after the exact unit and destination are fixed.
Is ZX200-5G the same as ZX200-5A?
Do not assume it. Regional naming and equipment can differ; verify the exact PIN and market specification.
What bucket range is published for ZX200-5G?
The official sheet lists 0.51-1.20 m³ ISO heaped, depending on configuration.
What rated power is published for ZX200-5G?
The official sheet lists 125 kW, but do not apply that figure to another generation without verification.
Can a new plate prove model identity?
No. Identity must connect plate, PIN location, components, monitor, service data and whole machine.
Does YUANJIAN offer ZX200 inspection?
Free consultation and optional paid inspection are available under an agreed scope.
Do public prices include freight?
No. Freight and destination costs require port, dimensions, weight and validity.
Continue the identity check
Independent used-equipment guidance. Hitachi is a trademark of its respective owner. YUANJIAN MACHINERY INTERNATIONAL TRADING LIMITED is an independent supplier and not an authorized Hitachi dealer.